Gearboxes And Gear Motors

Product Details:

Our company manufacture and supplies 0.5 hp to 50.0 HP in 1.1 rpm to 450 rpm with Grease or oil filled gearbox with motor.
Brands available-
1) TRIPLE-D ®3) BONFIGLOLI
Mounting: B3 (Foot Mounted),B5 (Flange

Product Details:

 Worm gearboxes provide high torque with low speed gear ratio. Being simple and compact in design, these gears can achieve higher gear ratio.The gears in these gearboxes can be right or left-handed depending upon the purpose.

Price Range: 6100-90000/Unit.

Product Details:

Our range of helical, helical bevel, spiral bevel gearboxes can be easily configured to industrial process parameters thanks to a high range of gear transmission ratios. The high level of efficiency of our gearboxes ensure an ideal drive package that meets demanding requirements of the industry. In connection with three-phase AC.
3-stage and 4-stage gearboxes
Hollow shaft with keyway or shrink disc
Solid shaft with keyway
Foot or flange mounting
Price Range:- 6500-15000/Unit.
 

Product Details:

Horizontal/ Flange Mounting Single Stage Cycloid Reducer has been made by Advanced international technology which can be certify by international quality standard.
The product's enterprise standards are based on participated industrial standards, and product's technological level is in the lead in the industry.
Range: 0.50 to 100 hp
Ratio: 11:1, 17:1, 23:1, 29:1, 35:1, 43:1, 59:1, 71:1, 87:1
Type: XWD/JXJ Series
Mouting: Foot / Flange Mounting
Application: Line / Kiln / Convair & All industries: Ceramic Industrial
Material Handling, Pharma, Packaging,
Food Processing, Ceramic etc.

Product Details:

Our company manufacturer F series Gearbox with brand name TRIPLE-D® With Standard & Brake motor(0.25 HP to 250 HP) and Ratio (3.5 to 276 ratio)

Product Details:

Our company manufacturer K series Gearbox with brand name TRIPLE-D® With Standard & Brake motor(0.25 HP to 250 HP) and Ratio (3.5 to 276 ratio)

Product Details:

   Worm gearboxes provide high torque with low speed gear ratio. Being simple and compact in design, these gears can achieve higher gear ratio.The gears in these gearboxes can be right or left-handed depending upon the purpose.

Price Range: 6100-90000/Unit.

Product Details:

Our company manufactures and supplies Helical Gear Motor with Output Speed: 1.5rpm - 650rpm KW/HP: 0.18 kW/ 0.25hp - 55kW/ 75hp
Brand Available:-
1) TRIPLE-D®2) PREMIUM.3) VIJAY.4) MOTOVORIO.5) BONFIGLIOLI6) BONVORIO.7) PBL.8) ELECON.9) JK FENNER.10) SEIMENS FLENDER.
Mounting: B3 (Foot Mounted),B5 (Flange Mounted),B35 (Foot cum Flange Mounted)
Frame Sizes: 63 - 250.
Material for Construction:Cast 

Product Details:

Horizontal/ Flange Mounting Single Stage Cycloid Reducer has been made by Advanced international technology which can be certify by international quality standard.
The product's enterprise standards are based on participated industrial standards, and product's technological level is in the lead in the industry.
Range: 0.50 to 100 hp
Ratio: 11:1, 17:1, 23:1, 29:1, 35:1, 43:1, 59:1, 71:1, 87:1
Type: XWD/JXJ Series
Mouting: Foot / Flange Mounting
Application: Line / Kiln / Convair & All industries: Ceramic Industrial
Material Handling, Pharma, Packaging,
Food Processing, Ceramic etc.

Product Details:

Horizontal/ Flange Mounting Single Stage Cycloid Reducer has been made by Advanced international technology which can be certify by international quality standard.
The product's enterprise standards are based on participated industrial standards, and product's technological level is in the lead in the industry.
Range: 0.50 to 100 hp
Ratio: 11:1, 17:1, 23:1, 29:1, 35:1, 43:1, 59:1, 71:1, 87:1
Type: XWD/JXJ Series
Mouting: Foot / Flange Mounting
Application: Line / Kiln / Convair & All industries: Ceramic Industrial
Material Handling, Pharma, Packaging,
Food Processing, Ceramic etc.

Product Details:

Our company manufacturer K series Gearbox with brand name TRIPLE-D® With Standard & Brake motor(0.25 HP to 250 HP) and Ratio (3.5 to 276 ratio)

Product Details:

Horizontal/ Flange Mounting Single Stage Cycloid Reducer has been made by Advanced international technology which can be certify by international quality standard.
The product's enterprise standards are based on participated industrial standards, and product's technological level is in the lead in the industry.
Range: 0.50 to 100 hp
Ratio: 11:1, 17:1, 23:1, 29:1, 35:1, 43:1, 59:1, 71:1, 87:1
Type: XWD/JXJ Series
Mouting: Foot / Flange Mounting
Application: Line / Kiln / Convair & All industries: Ceramic Industrial
Material Handling, Pharma, Packaging,
Food Processing, Ceramic etc.

Additional Information:

• Production Capacity: 50
• Delivery Time: 4 TO 5 DAYS
• Packaging Details: IF NEEDED THEN WOODEN BOX CHARGE EXTRA

Product Details:

Aluminum casing gear boxes are manufactured with high quality material in order to guarantee the maximum reliability and strength for long life of gear box. The worm wheel has a G20 cast iron hub onto which a casting in AS 1 bronze RIM is fitted.

price range- 2500-32000

Product Details:

Our company manufactures and supplies Helical Gear Motor with Output Speed: 1.5rpm - 650rpm KW/HP: 0.18 kW/ 0.25hp - 55kW/ 75hp

 

Brand Available:-

 

1) TRIPLE-D®

2) PREMIUM.

3) VIJAY.

4) MOTOVORIO.

5) BONFIGLIOLI

6) BONVORIO.

7) PBL.

8) ELECON.

9) JK FENNER.

10) SEIMENS FLENDER.

 

Mounting: B3 (Foot Mounted),B5 (Flange Mounted),B35 (Foot cum Flange Mounted)

 

Frame Sizes: 63 - 250.

 

Material for Construction:Cast Iron.

 

Product Details:

TRIPLE-D product is manufactured using high-quality basic material and latest technology in compliance with set industrial standards and norms. This range is strictly checked by best quality checker team in order to deliver production defect free range to our client from our end. Moreover, offered motors can be availed at market leading rates. Voltage:Single phase Worm Gear Motor Supply 220/415 ?? 5% volts 50 HZ .Mounting:Single phase Foot Mounted Gear MotorSingle phase Flange Mounted Gear MotorWorm Shaft:Worm Shaft id of the single piece accurately made out of case carburized alloy steel. The worm Motor is Solid with a shaft made of high-grade alloy steel so as to give hardware resisting surface duly case hardened & super finished. The Bearing & Oil Seal generals are accurate, cylindrically Ground to give smooth running. Bearing:The ball or roller bearings are used in worm wheel with ample capacity so that is can take journal and thrust loads.Oil Seals:Superior quality oil seals are used to ensure complete oil tight. Lubrication:Gear and bearing are automatically and positively lubricated by means of serially selected synthetic lubricant at all speed by the splash of their lubricant from the sump. Thus no special attention is necessary for a long time of gear lubrication. Application:Conveyors, Packaging, laboratory stirrer

Product Details:

 Worm gearboxes provide high torque with low speed gear ratio. Being simple and compact in design, these gears can achieve higher gear ratio.The gears in these gearboxes can be right or left-handed depending upon the purpose.
Price Range: 2200-90000/Unit.

Product Details:

Our company manufactures and supplies Helical Gear Motor with Output Speed: 1.5rpm - 650rpm KW/HP: 0.18 kW/ 0.25hp - 55kW/ 75hp

Product Details:

SMSR Gearbox with ratio 5/13/20, bore size 32 to 85 mm and model C to H.
Brand Available of Gear box-
1) TRIPLE-D®2) JK FENNER.3) AGNEE.

Product Details:

SMSR Gearbox with ratio 5/13/20, bore size 32 to 85 mm and model C to H.

Brand Available of Gear box-
1) TRIPLE-D®2) JK FENNER.

Product Details:

Our company manufactures and supply Gear Motor- 0.25 HP to 20 HP in Box- 25 to Box- 150 with 5.0 to 100 ratio (300 to 15 RPM) with hollow & solid shaft.

Product Details:

 Worm gearboxes provide high torque with low speed gear ratio. Being simple and compact in design, these gears can achieve higher gear ratio.The gears in these gearboxes can be right or left-handed depending upon the purpose.

Price Range: 6100-90000/Unit.

Product Details:

TRIPLE-D is manufactured using high-quality basic material and latest technology in compliance with set industrial standards and norms.
This range is strictly checked by best quality checker team in order to deliver production defect free range to our client from our end. Moreover, offered motors can be availed at market leading rates.
Voltage:Single phase Worm Gear Motor Supply 220/415 ± 5% volts 50 HZ .Mounting:Single phase Foot Mounted Gear MotorSingle phase Flange Mounted Gear MotorWorm
Shaft:Worm Shaft id of the single piece accurately made out of case carburized alloy steel. The worm Motor is Solid with a shaft made of high-grade alloy steel so as to give hardware resisting surface duly case hardened & super finished. The Bearing & Oil Seal generals are accurate, cylindrically Ground to give smooth running.
Bearing:The ball or roller bearings are used in worm wheel with ample capacity so that is can take journal and thrust loads.Oil Seals:Superior quality oil seals are used to ensure complete oil tight.
Lubrication:Gear and bearing are automatically and positively lubricated by means of serially selected synthetic lubricant at all speed by the splash of their lubricant from the sump. Thus no special attention is necessary for a long time of gear lubrication.
Application:Conveyors, Packaging, laboratory stirrer

Product Details:

Worm gearboxes provide high torque with low speed gear ratio. Being simple and compact in design, these gears can achieve higher gear ratio.The gears in these gearboxes can be right or left-handed depending upon the purpose.

Product Details:

TRIPLE-D product is manufactured using high-quality basic material and latest technology in compliance with set industrial standards and norms. This range is strictly checked by best quality checker team in order to deliver production defect free range to our client from our end. Moreover, offered motors can be availed at market leading rates. Voltage:Single phase Worm Gear Motor Supply 220/415 ?? 5% volts 50 HZ .Mounting:Single phase Foot Mounted Gear MotorSingle phase Flange Mounted Gear MotorWorm Shaft:Worm Shaft id of the single piece accurately made out of case carburized alloy steel. The worm Motor is Solid with a shaft made of high-grade alloy steel so as to give hardware resisting surface duly case hardened & super finished. The Bearing & Oil Seal generals are accurate, cylindrically Ground to give smooth running. Bearing:The ball or roller bearings are used in worm wheel with ample capacity so that is can take journal and thrust loads.Oil Seals:Superior quality oil seals are used to ensure complete oil tight. Lubrication:Gear and bearing are automatically and positively lubricated by means of serially selected synthetic lubricant at all speed by the splash of their lubricant from the sump. Thus no special attention is necessary for a long time of gear lubrication. Application:Conveyors, Packaging, laboratory stirrer

Product Details:

Our company manufacture and supplies 0.5 hp to 50.0 HP in 1.1 rpm to 450 rpm with Grease or oil filled gearbox with motor.
Brands available-
1) TRIPLE-D ®3) BONFIGLOLI
Mounting: B3 (Foot Mounted),B5 (Flange